400 Amp DC Current transducer with cable

Part #LEMHTA400-S

MFG #LEMHTA400-S

Features

From the factory, the DCM100 is configured to use a 200A Hall effect current sensor. If you are

using a 400A or 600A current sensor, you should configure the DCM100 for the proper sensor

type.

Pin Number (Signal Name Connection)

• 1 (IA Current Sensor, Red Wire)
• 2 (IB Current Sensor, Green Wire)
• 3 (IC Current Sensor, Black Wire)
• 4 (ID Current Sensor, White Wire)
• 5 (V SENS+ Battery, + Terminal)
• 6 (V SENS- Battery, - Terminal)
• 7 (V PWR- Vessel Ground)
• 8 (V PWR+ 9-32 VDC Power)
• 9 (N/A No Connect)
• 10 (N/A No Connect)
• 11 (TA Temperature Sender, Red Wire)
• 12 (TB Temperature Sender, Black Wire)

Specifications

Documents

Prop 65