Temperature Module

Temperature Module

Part #TMP100-01

MFG #TMP100-01

$305.00 / ea

Maretron's TMP100 measures the Temperature for up to 6 Temperature probes and reports the information over an NMEA 2000® network. The TMP100 supports up to 4 thermistor probes and 2 high Temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air Temperature, engine room air Temperature, refrigerator/freezer Temperature, under bolt Temperature (inverters, charges, pumps, motors, etc.), tank Temperatures (live well bait, hot water, etc.), and air duct Temperatures. The optional thermocouple probes (0°C to 900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a comprehensive fuel management system.

Best of all, the TMP100 is NMEA 2000® certified so you can view any and all temperature information anywhere on the vessel using a compatible NMEA 2000® display. The TMP100 is a key component of Maretron's N2KView® vessel monitoring and control system.

Six external temperature probes are measured and broadcast Over NMEA 2000® network
Four channels for thermistor probes and two channels for high temperature thermocouple probes
Wide variety of applications supported with optional temperature probes

Optional Temperature Probes:

Ambient Air Temperature Probe (-20°C to 80°C or -4°F to 176°F)
Ring Terminal Probe (-20°C to 80°C or -4°F to 176°F)
Immersion Probe for Tanks or Plenums (-20°C to 80°C or -4°F to 176°F)
Exhaust Gas Temperature Probe (0°C to 900°C or 32° to 1652°F)

Applications:

Cabin temperature
Engine room temperature
Under bolt temperature (Inverters, chargers, pumps, etc.)
Refrigerator / freezer temperature
Tank temperatures (Live well bait, hot water, etc.)
Air duct temperature
Exhaust gas temperature

Electrical:

Number of Thermistor Channels: 4
Number of Thermocouple Channels: 2
Measurement Range – Thermistor: -20°C to 80°C (-4°F to 176°F) (With supplied thermistor probe)
Measurement Accuracy – Thermistor: ± 2°C (± 3.6°F) (With supplied thermistor probe)
Measurement Range – Thermocouple: 0°C to 900°C (32°F to 1652°F) (With supplied thermocouple probe)
Measurement Accuracy – Thermocouple: ± 2°C (± 3.6°F) (With supplied thermocouple probe)
Operating Voltage: 9 to 32 Volts (DC Voltage)
Power Consumption: 100 mA (NMEA 2000® Interface)
Load Equivalence Number (LEN): 2 (NMEA 2000® Spec. [1LEN = 50 mA])
Reverse Battery Protection: Yes (Indefinitely)
Load Dump Protection: Yes (Energy Rated per SAE J1113)